Skip navigation
Line 6 - Support
Up to Discussions in POD Farm / POD Studio / TonePort
1676 Views 2 Replies Latest reply: Nov 20, 2009 8:14 AM by Line6Hugo RSS
Singapura Just Startin'
Singapura
2 posts since
Oct 8, 2009
Currently Being Moderated

Nov 13, 2009 5:00 AM

Switching to another preset with UX2

Dear Sir,

 

It is regarding POD Studio UX2 operation. Currently owning UX2 and Variax 600. Typically when playing a song, will switching the Variax 600 to acoustic guitar and set the Gearbox's amp and effect to a configuration for the acoustic guitar. Down the song, when come to the 'solo' part, which typically will switch to electric guitar on the Variax 600, will also wish to switch to another set of configuration for the amp and effect. Any advise on this endeavor with the current devices I own or is there any additional device I will need to make this endeavor possible?

 

Read about footswitch in the UX2 and MIDI cc on the Gearbox. Seem like these features are relatively close to making the job above. Any advise on the procedure if these features are possible to do the job. Thanks in advance.

 

Regards,

Singapura

Tags: ux2, gearbox, activate, studio, footswitch, midicc
  • Line6Hugo Line 6
    Line6Hugo
    6,332 posts since
    Apr 8, 2007
    Currently Being Moderated
    Nov 18, 2009 9:30 AM (in response to Singapura)
    RE: Switching to another preset with UX2

    Singapura,

       

      It's not too clear what exactly you are trying to achieve, but if you are asking if Gearbox can change the Variax guitar model when you change presets, it is not possible.  You will need to manually change the guitar model (from acoustic to electric and vice versa) as you change presets in Gearbox.

       

      Was this answer helpful to you?

       

      Regards,

       

      Line6Hugo

  • Line6Hugo Line 6
    Line6Hugo
    6,332 posts since
    Apr 8, 2007
    Currently Being Moderated
    Nov 20, 2009 8:14 AM (in response to Singapura)
    RE: Switching to another preset with UX2

    Hello,

       

      It's been a few days since we've heard from you. We're going to assume your question has been answered and close this thread. If you still have questions please feel free to re-open this thread or create a new question with us and we will answer your questions accordingly. Thanks!

       

      Regards,

       

      Line6Hugo

       

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • Correct Answers - 5 points
  • Helpful Answers - 3 points