Jump to content

Search Articles

Recent Comments

* - - - -

How to Update AMPLIFi 30/75/150/FX100/TT with Windows or OSX

amplifi update android connection firmware 75 150 30 fx100 tt

Here are the steps needed to update an AMPLIFi with Windows or OSX. The whole process should only take about 5 minutes. Click on each image to expand it.


Windows users: First thing that needs to be done is to download the Amplifi driver from www.Line6.com/software if you haven't already. Here's the link:




Step 1:
Download and install Line 6 Updater from www.Line6.com/software, using the links below:


Win 7, 8, and 10


OSX 10.8-10.11


Step 2:
Connect the Amplifi gear to your computer with a standard USB A/USB B cable, and then run Line 6 Updater program.


Step 3:
With your Line 6 user name and password, log into the program.


Attached Image: 1.PNG


Step 4:
Click on the connected Amplifi. Here, we're updating the TT.


Attached Image: 2.PNG


Step 5:
Click on the latest version of firmware from the top of the list. You do not have to install each previous version, just the latest.


Attached Image: 3.PNG


Step 6:
This page shows you what you'll need to do if the update fails (we'll go over this at the end in detail). In the meantime, hit Next.


Attached Image: 4.PNG


Step 7:
Here's the program doing its thing.


Attached Image: 5.PNG


Step 8:
Once done, power cycle the unit.


Attached Image: 6.PNG


Step 9:
Forget or unpair the Amplifi unit from your mobile device's Bluetooth menu. Press and briefly hold the Bluetooth button on the Amplifi until it flashes quickly. On your mobile device, go to your Bluetooth settings and select the device, as it's trying to connect. Once reconnected, launch the Amplifi Remote app.


In the event that the update fails, or the gear isn't rebooting properly after the update, you'll need to enter update mode by holding down "Tone" and "Tap" while booting up. If using the FX100, hold down footswiches A and C.


Note: If an update continues to fail, please try another computer's USB ports. USB port stability can vary between computers.


Attached Image: last.PNG


NOTE TO FX100 OWNERS: After performing the steps below, you must perform a reset and a pedal calibration. Here are the instructions for that: http://line6.com/sup...-for-fx100-r645