Jump to content


- - - - -

How To Update Firmware on AMPLIFi 75 & 150

amplifi line 6 ios apple ipad iphone ipod update firmware

We always recommend that you run the latest firmware in your AMPLIFi amplifier. Your AMPLIFi Remote application will inform you whenever a firmware update is available, so you'll always know you have the latest version! Follow the instructions below to update the firmware of your AMPLIFi.

**Before getting started ensure that your iOS device has a consistent connection to a cellular or wifi network. We recommend to make sure your iOS device has at least a 50% charge on the battery or plug your iOS device into it's power supply to prevent the iOS device from shutting down during the update. While performing the update we also recommend that leave your iOS device idle within close proximity and unobstructed line of sight of the AMPLIFi to avoid interruptions in the updating process.
**

CLICK HERE for a video tutorial on Bluetooth Pairing your AMPLIFi.

CLICK HERE for a video tutorial on updating the firmware on your AMPLIFi.
  • Enable Bluetooth on the device you would like to stream audio from.
  • Put the AMPLIFi into ‘Pairing Mode’ by pressing and holding the Bluetooth button located on the upper left of the top panel - it will begin to flash to indicate it is in ‘Pairing Mode’.
  • Within the Bluetooth options of your device an entry for ‘AMPLIFi’ will appear.
  • Select the ‘AMPLIFi’ entry and pair with it - the Bluetooth LED will stop flashing and become solid lit blue.
  • Download the AMPLIFi Remote app directly from the Apple App store.
  • Launch the AMPLIFi Remote app.
  • Log in to your Line 6 user account. If you do not already have a Line 6 user account, you can create one HERE or with the link provided on-screen within the app.
  • Once the app is launched, tap the ‘Menu’ icon in the upper left corner.
  • Tap the ‘Settings’ icon in the lower left of the menu.
  • From the ‘Settings’ menu, tap the option labeled ‘Amp Flash’.
  • You will then see the updates available for your AMPLIFi.
  • To begin the update process simply tap the ‘Update’ button and allow 10-20 minutes for the update to complete.
If your firmware update is interrupted and unsuccessful the AMPLIFi hardware may display symptoms such as all of it’s LEDs being lit or flashing. In this case, try again to use the AMPLIFi Remote app to update the firmware and make sure to review our AMPLIFi Bluetooth Connectivity Troubleshooting information HERE.

Q: What should I do if the update is accidentally interrupted or fails?
A: If your update is accidentally interrupted or fails turn your AMPLFi off and back on again. Press the Bluetooth button once and re-pair your AMPLIFi with your iOS device. Re-start the update in the Setting page of the AMPLIFi Remote app.

Q: What happens if I receive a call while the amp is updating?
A: If you receive a call while your AMPLIFi is updating make sure to stay within range of the AMPLFi, and when you call completes the update will resume.


0 Comments