Jump to content


* * * * *

Vetta 2.5 Known Issues

bug pedal vetta mix delay drive gain issue known post

Vetta II Post Delay Mix Issue
On some patches with POST DELAY active, you will notice that if you turn DELAY off/on, the perceived mix will jump to %100. Please follow the steps below when the problem patch is active to resolve this issue:

  • Select FOOT CONTROL.
  • Scroll to Page 4 that say PEDAL 1.
  • Use the black knob under DEST to assign PEDAL 1 to a different parameter (an fx you are not using on the patch),
Go to page 5 and if PEDAL 2 is set to POST DELAY MIX, follow the same instructions above.
  • Select SAVE twice to save the changes.
Gain/Drive Reversal When Using Line 6 Edit
  • Drive and gain for distortion effects are reversed when loaded into Line 6 Edit: After loading a tone or changing the model selection, the drive and gain values for distortion effects are reversed when comparing the amp display to Line 6
edit. When adjusting the drive or gain using Line 6 Edit or the amp, the correct control moves and jumps to match the value of the one you are moving. This effects all distortion effects, and also happens when loading a tone.


0 Comments