Categories See All →
- General FAQ
- Live Sound
- Mobile Products
- Computer Based Recording
- Legacy Products
M5/M9 Firmware Update Instructionsline 6 m5 m9 firmware flash memory update instructions how to
M9/M5 FIRMWARE UPDATE INSTRUCTIONS
- A MIDI interface that connects to your computer via USB (download the current Driver for it if you don't have it installed)
- 2 MIDI cables (or a MIDI interface such as the M-Audio Uno that comes with attached MIDI cables)
- For further infomation on MIDI connectivity and interfaces, please go over the following MIDI Document
- Line 6 Monkey 1.35 or higher installed. Download and install the Line 6 Monkey software here
- Connect your MIDI interface to your computer via USB cable.
- Connect the M9/M5 MIDI Out to your MIDI interface In, and connect the M9/M5 MIDI In to your MIDI interface Out.
- Launch the Line 6 Monkey 1.35 (or higher) with the M9/M5 connected via the MIDI interface and powered on.
- Select the Flash Memory line item and click the Update Selection button to install the flash memory update into the M9/M5.
- The device will receive the firmware data and the unit will be updated to the latest Firmware. It sometimes takes 30 seconds to 1 minute to appear like the unit is receiving the update and takes several minutes to complete. The M9/M5 will re-initialize when the update is complete.