Jump to content

- - - - -

Device Positioning for Updating Transmitters and Receivers

line 6 digital wireless microphones xd-v relay positioning update firrmware flash memory

The XD-V75 receiver firmware can be updated via the mini-USB port connection to a host computer (Windows XP/Vista/7 or Mac OSX 10.5/10.6/10.7) using the Line 6 Monkey software application. In addition, the XD-V75 receiver can function as an "interface" to update other Line 6 XD-V7x Digital Wireless devices.

The actual instructions are provided via the Monkey software step-by-step wizard.

This KB Doc was created to help clarify the actual physical positioning of devices, as this will have a direct bearing on the success rate of updating the other devices in question.

1. XD-V75 Update of an XD-V75 (or XD-V70) Microphone Transmitter: note that the microphone's update chip is near the middle-top portion of the microphone; the mic is positioned sitting on top of the XD-V75's attached antenna (folded to the left/downward at a 90-degree angle), which is connected to "B OUT":

Attached Image: USB Update posiotioning 1.jpg

2. XD-V75 Update of a TBP12 Transmitter (physically place the transmitter as such on top of the B Out single antenna):

Attached Image: USB Update positiong 2.jpg

3. XD-V75 Update of an XD-V30 Transmitter:

Attached Image: XDV30+Transmitter+Positioning pic3.jpg

4. XD-V75 Update of an XD-V70 Receiver (Note: mandatory usage of Balanced, or 'stereo' TRS 1/4" cable inbetween the XD-V75 and XD-V70):

Attached Image: USB Update positioning 4.jpg