Categories See All →
- General FAQ
- Tutorial Videos
- AMPLIFi Series Products
- Live Sound
- Mobile Products
- Dream Rig
- Legacy Products
- Japanese Support 日本語サポート
L6 link and the Helix
brotherplucker - Nov 06 2015 08:18 AM
Helix Troubleshooting Tricks
Boccia - Oct 18 2015 05:11 PM
Helix Amp Model Comparison...
movingmatter - Oct 17 2015 03:43 PM
POD X3 Liveのトラブルシューティングとよくあ...
juansin62 - Oct 26 2014 04:41 AM
FX100 Post-Update Reset and...
aspiller - May 19 2014 06:12 PM
XD-V55/V55H/V55HS/V55L FAQline 6 digital wireless mic faq xd-v55 xd-v55h xd-v55hs xd-v55l
XD-V55 Pilot's Guide
XD-V55H Pilot's Guide
XD-V55HS Pilot's Guide
XD-V55L Pilot's Guide
- 300 foot (100 meter) range
- 12 Channels supporting up to 12 simultaneous systems
- 24-Bit digital audio signal; providing the audio response of a cable without companding
- 10Hz to 20 kHz bandwidth, with up to 117 dBA dynamic range
- Microphone Modeling (on the Handheld Transmitter)
- EQ/Filter Modeling for headset, instrument and lavalier mics (on the Bodypack Transmitter)
Dynamic Filter: engage this feature on the receiver to minimize stage rumble or handling noise.
THH12 (Handheld Mic Transmitter) offers four selectable vocal microphone models:
-  - Shure SM57
-  - Shure SM58
-  - Sennheiser e835
- [L6] - Line 6 Custom
- [FLAT] - No EQ (no roll-off or boost to the signal)
- [S1] - Microphone EQ (Vocal EQ Setting #1: Low Cut)
- [S2] - Microphone EQ (Vocal EQ Setting #2: Headworn Lavalier Setting)
- [IF] - Instrument (20-foot guitar cable High Frequency roll-off)
- Power on the Transmitter
- Hold the Select button until the Channel Number flashes
- Press and hold the On/Mute (Power) button and then quickly press the Select AND Value/Power for Handheld) within one second. Waiting longer than one second may turn off the Transmitter
- Check the LCD Display; reading should change to RF-1 in place of CH, indicating that the Transmitter is now in RF1, which is what the older XD-V70 and XD-V30 Receivers operate on
Does USB 3.0 create interference in the 2.4GHz frequency range?
USB 3.0 computer cables and peripherals, including hard drives, are known to emit radio frequency interference throughout the 2.4GHz band, which results in reduced range and/or performance for any 2.4GHz device in its proximity (including wireless keyboard or mouse, WiFi, etc.). We recommend placing any digital wireless receivers at least two meters away from the USB 3.0 device and its cabling.
Below is a link to a study by Intel regarding this interference.