Categories See All →
- General FAQ
- Computer Based Recording
- Dream Rig
- Live Sound
- Mobile Products
- Legacy Products
- Japanese Support 日本語サポート
Post Flash Update Instructi...
aspiller - May 19 2014 06:12 PM
StageSource Feedback Suppression Explained Furtherstagesource l2t l2m l3t l3m feedback fbs suppression speakers
Press and hold the FBS button and you will see the colors cycle through, green to yellow to red and back to green. Release the FBS button when you are on the desired setting.
RED is for speech. An example is an individual doing a Power Point presentation. This could apply to a couple of people speaking at the same time, but the key is that human speech and human speech ONLY, is coming through the system.
YELLOW is for vocal singing. An example would be acapella singing. This could be a group or a solo singer/performer, but it is meant for human singing voice only, with no other instrumentation. You may be able to use this for a singer/songwriter solo guitar and vocal. Yellow can work in this case because guitar and voice are in very similar frequency ranges, but, depending on the material, GREEN may be a better option in that case.
GREEN is intended for universal application and should be used as a default feedback suppression setting. Only switch to the YELLOW or RED setting when the GREEN setting is not properly addressing your feedback concerns, or where feedback reduction is more important than audio quality. Using more aggressive feedback suppression settings may cause sonic artifacts in some cases.
If you are experiencing undesirable artifacts when using Feedback Suppression:
If you are experiencing undesirable artifacts when using Feedback Suppression it may be that a less aggressive setting should be used. Results are typically most pleasing when using the least aggressive setting that is appropriate for the given situation. It is good practice to start with the GREEN mode and only to move on to YELLOW and then RED if feedback is not being properly addressed.
Green is for good and green is for go. In the majority of cases, customers should use green and they will be good to go.