Uploading and sharing M13 pacthes via Vettaville.nl instructions.
A new service has been enabled. Vettaville.nl holds a database for all products that are not CustomTone enabled. Or in other words those Line 6 products that can save your own patches but they can not be exchange via MIDI or USB. Products like the Spider Series, Low-Down Bass Amps, Spider Valve, DL-4, M13 Stompbox modeler etc.
The new database offers:
- Viewing of knob settings for all or selected patches in the database
- Printing of knob settings for all or selected patches in the database
- Selecting patches for music types
- Upload and save strorage of personal patches
- Look and feel of the amp or stompbox panel lay-out
- Free use of the database
The use of the database is free however you need to have a free account to be able to upload your own entries. These entries will give you an extra savehaven for your settings in case you have a rentalamp or you're with a friend and forgot to write down your settings. In these cases you just visit vettaville.nl and have that extra back-up that's always available wherever there's an internet connection at hand.
The first patches that are uploaded are the factory patches of the LowDown amps, but all other areas are already enabled for upload of your own patches. You can log in for free
here.
How to use the Patch Database
To use the database select patch Database in the Patches Menu. Then you can choose what Stompbox- or Amp-type you need viewing of patches for. Select it and click next. Now all patches for the selected geartype will be visible.
Selecting Patches
If you want to make a slection of the selection use the upright box that says all and open it. Now select the music type that you want the patches for and only those that meet the selection will be visible.
Printing Patches
If you want to print out some patches, just move your mouse to the liitle square box on the right of the patch and click your left mouseknob. It will show a little v-mark to select the patch for printing or export to a .pdf that you can upload to most mobile phones or save on your own computer. Select as many as you want and click print. Follow to the steps of your own printer to print them.
Patches for M13 stompbox modeler are printed in black/white at request to save toner or inkt and will save your inkt or toner...
Uploading Patches To upload patches you need to be logged in. You can log in for free
here. After the correct login you'll be re-directed to the latest news page. If you're see a blank page appear, that means that you're
not logged in.
If you want to upload patches you need to select the Upload Patches link from the downloads menu under Patches > Upload Patches. Here's a re-direct
link.
Short Steps.
1. Log-In
2. When you're logged in go the upload patches page and click on "add a new patch"
3. Select the product where you want to upload a patch for by clicking the approriate add button.
Fill out the info presented and turn the amp knobs to their desired position. When all are in the right position press save or next. Now your patch is saved.
Uploading Patches for M13 Stompbox Modeler To upload patches you need to be logged in. You can log in for free
here.After the correct login you'll be re-directed to the latest news page. If you're see a blank page appear, that means that you're
not logged in.
If you want to upload patches you need to select the Upload Patches link from the downloads menu under Patches > Upload Patches. Here's a re-direct
link.
Not 13 Steps.
1. Log-In
2. When you're logged in go the upload patches page and click on "add a new patch"
3.Press the M13 Stompbox Modeler "add" button.
Fill out the desired Scenename and add commentinfo that you feel is approriate for the scene you're going to upload the parameters for. Now press save.
4. Use the Pull down menu to select the desired stompbox grouptype and press "Choose stompbox grouptype"
5. Use the Pull down menu to select the desired stompbox type and press "Choose stompbox"
6. Fill out the parameters by using the + or - buttons, select the parameter from the pull downmenu or fill out the percentage in the white "0" square. Press save when you're done.
7. Use the Pull down menu under Column and Row to 'place' the stompbox on the scene grid.
8. Repeat Step 4 to 7 until your scene is completed
Hope it helps
Regards Hans
Line 6 Story
News
Press
Jobs
Support
Contact Us
