Currently Being ModeratedSep 1, 2011 10:50 AM (in response to BryZilla)Re: RE: Using my UX2 as an external USB interface/soundcard
First thing would be to make sure you have the latest USB driver version installed for your laptop's OS:
- Windows: http://line6.com/software/readeula.html?rid=3987
After confirming that you have the driver installed, I'd try all USB ports with the UX2, as each USB port on a computer will provide a different path to the CPU, some better than others.
For input control of the UX2, you'll need to have at least the POD Farm 1.12 software program installed and running, as 1/4", XLR and Line 1/2 inputs are regulated via software control only for the UX2.
- Windows POD Farm 1.12:http://line6.com/software/readeula.html?rid=3143
- Mac POD Farm 1.12: http://line6.com/software/readeula.html?rid=3144
Those are the preliminary steps. I suspect you'll need to try the UX2 with different USB ports to find the one that provides the best communication to your CPU/software.
Currently Being ModeratedSep 5, 2011 2:01 PM (in response to Kneehow)Re: RE: Using my UX2 as an external USB interface/soundcard
after podfarm install it immediately firedup correctly.
do i still need to have the gearbox program on my computer now?
One other important question. I will be using the UX2 mostly for keyboard and vocal inputs, all the guitar modeling wont be used very much - so what should i set the podfarm program to, so that it doesnt color the input sound of my keyboard tones with amp modeling?
Basically, I need just dry clean input.