Best Answer dboomer , 17 June 2013 - 09:14 AM
The basic test is will your system work as you need if you hook it up with a cable. If it will it will work just the same with a G50. So if the signal from your mando or guitar will drive the mixer then the G50 will do just the same (although likely with less high frequency losses).
You should plug the tuner into the tuner out of the G50 receiver. That way it is completely out of the circuit ... true bypass or no. This also allows pushing the mute switch on the transmitter and having the ability to tune up without sending signal to the mixer or amp.Go to the full post