jimosity Posted June 17, 2013 Share Posted June 17, 2013 I have a Line 6 M9 that is acting strange.I'm using an external 'preset' box instead of an expression pedal.The preset box is simply a latching switch with a 10k resistor.I can set min/max settings on an effect and use the preset box to toggle between the two settings.What's weird is that I can do it a half dozen times without a problem, then all of a sudden it'll stop working and forget the min/mix settings and I have to set them again to get it to work.Any ideas on what's going wrong here? Quote Link to comment Share on other sites More sharing options...
phil_m Posted June 18, 2013 Share Posted June 18, 2013 Are you using manual save mode or autosave mode for your scenes? Or does this happen with you staying in the same scene? The expression pedal is reset whenever you unplug the the cable from the expression pedal jack on the back, so from that perspective, it's reset whenever the circuit it broken. It could be possible that sometimes when you press the switch, the circuit is broken, and it is telling the jack to reset. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.