KJMunson Posted November 19, 2014 Share Posted November 19, 2014 This started when i tried to update firmware from whatever to 2.01. I made the mistake of updating monkey with the POD attached. Gave me an error of some sort I dont remember exactly. Flashed everything and it now says 2.01 on the thing Now getting DSP failed boot. DId factory reset. After I did, DSP failed boot happened again. What next? 1 Quote Link to comment Share on other sites More sharing options...
BillBee Posted November 19, 2014 Share Posted November 19, 2014 Hey there - try this: IIRC Power Up with the Nav Pad Down = should let you hit the reflash mode. That should do it. If it fails be sure to post back and list system specs and such. -B Quote Link to comment Share on other sites More sharing options...
KJMunson Posted November 20, 2014 Author Share Posted November 20, 2014 If you mean that I should do the factory reset, Yes I have done that and it still is not working, giving me the DSP boot thing. All the things I have tried to do in monkey like upgrade from file have ended in 80009000 unknown MIDI error failure. apparently it did let me roll it back to 1.31. but still DSP boot failure. I am going to try factory reset again right now, and it failed again. going to update to latest again. windows 7 pod hd 400 what other information do you want. Quote Link to comment Share on other sites More sharing options...
BillBee Posted November 20, 2014 Share Posted November 20, 2014 Hmmm it does make a difference as to what HD you have and we are talking about a "safe mode reflash" not a reset. From Spaceatl's old post: http://line6.com/supportarchivenew/thread/53467 You can bring the HD400 up in safe mode the same way you do for a reset... Power up holding A. connect the USB cable start the monkey and try to flash it. If it isn't coming up correctly in the Monkey, kick off the driver install from Monkey, unplug the HD400 USB and follow the driver install prompts...Once the driver is in, you should be able to flash...I would suggest that you avoid installing the driver again in the all in one installs of Edit and Monkey.... It looks like your firmware got bonkered and needs to be reinstalled not reset. Hope that helps. Bill Quote Link to comment Share on other sites More sharing options...
tfreitas Posted May 21, 2015 Share Posted May 21, 2015 HOW TO SOLVE THE DSP BOOT FAILED. DURING A HD300 PRESENTED THE FOLLOWING MESSAGE: DSP BOOT FAILED AND THEN THE DISPLAY IS BLANK. SOMEONE PLEASE CAN SOLVE IT? JA COME FOR A MONTH NO SOLUTION! SOLUTION WILL HELP HELP Quote Link to comment Share on other sites More sharing options...
mayen Posted July 3, 2017 Share Posted July 3, 2017 Just reinstall the flash memory. xD Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.