porcytree Posted November 19, 2014 Share Posted November 19, 2014 Been testing out the POD HD tone conversion tool ( the one stickied at the top of this forum) to convert a load of old HD 300/400 and 500 patches for use on my HD bean. The 500s have all converted with no problems (as far as I have noticed) However, when I try to convert 300/400 patches a couple of odd things happen a) all deep amp edit parameters are set to 0 b) most,if not all, of the fx are turned off when the patch is loaded ( often with the mix set to 0 too) turning on the fx activates them except for those where the mix has been reset ( turning these fx on and raising the mix has no effect all and the fx remains inaudible. c) on many of the patches the cab defaults to the 2x12 Ported cab. Has anyone else had this problem? Is there a way to get the patches to convert " unchanged"? cheers porcs Quote Link to comment Share on other sites More sharing options...
BillBee Posted November 19, 2014 Share Posted November 19, 2014 Hey there been doing a bit of the HD500 to Desktop myself lately. IIRC there are some "issues" being worked out for the conversion of 300/400 tones to the other models. -B Quote Link to comment Share on other sites More sharing options...
porcytree Posted November 19, 2014 Author Share Posted November 19, 2014 cheers BB Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.