despero12 Posted November 19, 2014 Share Posted November 19, 2014 Hi guys, quick dumb question is if I can access in any way to presets in my Flextone III without shortboard? I have generic midi cable which doesn't word (of course lack of SysEX). I can't find any information on the web about access to more than 4 presets (A,B,C,D). Do I have to click something with bank button? I will appreciate any answer Quote Link to comment Share on other sites More sharing options...
snitter Posted February 14, 2015 Share Posted February 14, 2015 Hi mate Not sure if you are talking about live or at home. If it's live, then a shortboard, or programmable midi controller is the only way. If you get a midi-USB cable (pretty cheap on Ebay), you can connect to your PC and change to whatever patch you want with the Flex software. It would be a bit tricky to do it live though with the midi/pc. I had this thought a while ago, but haven't done anything about it. If you could get a small programmable midi controller with 2 switches, you could build it into the amp somehow, and program the buttons to switch banks up/down (the parameters are in the FLex manual). Theoretically, it should work.... It's a bit mad that they build an amp with loads of slots, but you can only access 4 from the actual amp itself. Regards Mark Quote Link to comment Share on other sites More sharing options...
Sawyer63 Posted September 24, 2016 Share Posted September 24, 2016 Need some suggested settings for a sybreed tone and killswitch engage tone. flextone 2 thanx Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.