Filthyanimal Posted November 26, 2014 Share Posted November 26, 2014 Hi All I have the flashing logo & the unit will not start or connect to my PC. I have tried holding the left arrow button & resarting the power but no luck. I have reinstalled all drivers & ran Line 6 Monkey & still no luck. I have changed the usb cable and restarted my PC. Notthing I an doing seems to work. The unit was sitting idle for about 2 months. When I initially turned it on it was OK. I unplugged it to move it. & when I turned it on it would not restart. Any ideas would be appreciated. Rick Quote Link to comment Share on other sites More sharing options...
BillBee Posted November 26, 2014 Share Posted November 26, 2014 Alright you Filthlyanimal :) Don't panic just yet - it may just be a matter of reflashing the firmware on that puppy. Did the L6 Monkey detect the HD? If so try (going off memory for my HD500 here): So IIRC with the USB cable "unplugged" start the HD with the left down key on the directional keypad then connect it to the PC for reflash. If that doesn't take try it on a different usb port (one of the rear ones). Let us know what happens. -Bill Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.