diggerbarnz Posted November 30, 2014 Share Posted November 30, 2014 dunno where I'm going wrong - I plugged in link cable & I have no sound (using strictly VDI to pod & link from there...maybe page 9/10 of setup screen on 500?? Just looked @ connectivity vid...seems that I have it right? I can see live changes on knobs...just no sound Just had scare 4 the day - I was so pissed w/no sound I plugged straight in w/1/4 & there was nothing - took out L6 line after shutting amp -down...better - I STILL cant get sound w/strictly VDI & L6 link. ..I can hear hiss on heavier patches but no reaction from guitar Quote Link to comment Share on other sites More sharing options...
diggerbarnz Posted November 30, 2014 Author Share Posted November 30, 2014 I just read this from another post - Hello, One item to check before updating the DT firmware: ensure the POD HD unit is set to MIDI channel 1 - otherwise the L6 connection may not work correctly. If you are on MIDI channel 1 then I reccomend reflashing the DT using a supported MIDI/USB Converter. I personally use the MIDISport Uno and have always had great results. now I never checked POD midi before I updated the DT (but POD wasn't connected then & update WAS successful - dunno - grasping @ straws here Quote Link to comment Share on other sites More sharing options...
radatats Posted November 30, 2014 Share Posted November 30, 2014 ok just to confirm, guitar>DT=sound. guitar>POD>headphones=sound. guitar>POD>DT=no sound. right? 1. check POD input set right. 2. check DT is not in STBY (sorry, just covering bases) 3. check BOTH POD and DT Master are turned up, Start with both at 1/4. and guitar volume up. Quote Link to comment Share on other sites More sharing options...
diggerbarnz Posted November 30, 2014 Author Share Posted November 30, 2014 correct - no sound when using LINK & NO 1/4 cables @ all - VDI into POD Quote Link to comment Share on other sites More sharing options...
diggerbarnz Posted November 30, 2014 Author Share Posted November 30, 2014 OMG - everyone PLEASE disregard my posts F@#$%^ me... Quote Link to comment Share on other sites More sharing options...
diggerbarnz Posted November 30, 2014 Author Share Posted November 30, 2014 The OTHER end of VDI MUST BE PLUGGED INTO POD TO GET RESPONSE....what a WASTE of a day I said it before..."the mind is a terrible thing to waste" Quote Link to comment Share on other sites More sharing options...
radatats Posted December 1, 2014 Share Posted December 1, 2014 been there done that... Quote Link to comment Share on other sites More sharing options...
diggerbarnz Posted December 1, 2014 Author Share Posted December 1, 2014 1st it was heart attack on the way to purchase Variax 59 in 2011...then nuthin but panic attacks after that....getting old suxx - memory is pretty bad - obviously vision is worse too lol Quote Link to comment Share on other sites More sharing options...
MartinDorr Posted December 1, 2014 Share Posted December 1, 2014 It's not hopeless ... you found it ... unless your wife or girl friend pointed it out ;-) I was there for different reasons at least 3 times and just disconnected everything before putting it back together to find it working. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.