hallo to myself (no one else asnwered, so i went to buy sonicport and try it by myself).
i really like the unit. very good design, it looks very solid too.
the sound, as expected, very clean.
but it seems to me not very logic the inputs design.
many apps (i work mostly with loopy), take the advantage of multiple inputs and let you select if record one or another, or both in case of stereo inputs.
you can do this with sonicport ONLY if use stereo 1,8" line input AND a stereo cable spliter, so you send your instrument to channel R, and your voice to channel L. this is quite tricky...
i don't know if by a firmware update it could be implemented that when you plug your instrument to the 1,4" instrument input, and another thing to the 1,8" line input, then you get one signal on each channel, that is what how the interface guitarjack2 does, for instance. it makes sense...
also the line level i get is very low, i have to put volume to my instrument almost to 90%, and there's no control panel or whatever where i could adjust it!
it would also make sense that mobile pod app would have this panel, where you can adjust in/out levels (then you quit the app and they remain as last adjusted) and also here you could select the behavior of the inputs, in case the stereo inputs could be handled using the two inputs sonicport has, let's take advantage of it, it has two inputs!! it's a real shame you can not use both them.