glitz Posted January 18, 2015 Share Posted January 18, 2015 I've got some problems trying to adjust patches to the same volume. I have about 10 different patches that I am going to use on a gig. The problem is that the volume differs a lot between the different patches. I've been trying to adjust the volume on the ampmodules in some patches, but the span from 0% to 100% isn't enough to do this efficiently. For example a patch with a clean sound has really low volume compared to a patch with high drive. Sometimes it isn't enough to set the volume to 100% on the clean patch to get the same volume as the one with high drive. In those cases I also need adjust the patch with high drive to a low volume. And then, all of the other patches have suddely have too low volume compared to the two I have adjusted. Is there any other way to adjust the volume on the patches (than changing the volume on the ampmodules) that has a larger span for the volume? It would be really nice with a feature to normalize the volume on a number of patches... Quote Link to comment Share on other sites More sharing options...
Triryche Posted January 19, 2015 Share Posted January 19, 2015 Start with your quietest patch and adjust the volume, then lower the volume of all the other patches to match. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.