MIKEY9966 Posted February 9, 2015 Share Posted February 9, 2015 i am trying to turn off all effects and amp, cab, easy to turnoff effect but is there a way to turn of the amps and cabs? I am trying to do this to hook up my pod 500 because there are no outs on amplfi 150, i think this was a bad move by line 6 Is there a pc screen like on the pod 500 to edit on the screen or is the tablet the only way? Thanks for your help Quote Link to comment Share on other sites More sharing options...
Triryche Posted February 9, 2015 Share Posted February 9, 2015 In the AMPLIFi Remote App click AMP>>Type>>Clean>>No Amp By default when selecting no amp there will be no cab. Are you trying to use the AMPLIFi to monitor the 500? If so, use the AMPLIFi's AUX in, it will bypass all the modeling, so no need to disable. You can use a cable like this: http://www.amazon.com/Hosa-CMP153-Cable-Inch-Dual/dp/B000068O3C Currently there is no PC Editor. Quote Link to comment Share on other sites More sharing options...
MIKEY9966 Posted February 9, 2015 Author Share Posted February 9, 2015 Thanks for help, would the no amp work as well as the aux input? I know it wont be streo, , do ypu think a pc edit is on the way? Quote Link to comment Share on other sites More sharing options...
Triryche Posted February 10, 2015 Share Posted February 10, 2015 If you are talking about running the output of the POD HD500 into the AUX in of the AMPLIFi, it does not matter if you have amps or no amp models in the AMPLIFi, that signal is not affected by the AMPLIFi models, same with music streamed via Bluetooth. With the 2 X 1/4" TS to 1/8" TRS cable I linked, it will be stereo if your effects on the HD are stereo. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.