Please ensure Javascript is enabled for purposes of website accessibility Jump to content

Using The Amp Tuner


Recommended Posts

The tuners on all Line 6 products are chromatic, so as long as you're using A440 as your reference pitch, you don't need to adjust anything on the tuner itself to lower the tuning of your guitar. Just use tuner to tune the strings to the note you want them at. For example, if you want to tune a step down, tune your E string to D, your A string to G, etc.

Link to comment
Share on other sites

SchectersDemon, A440 is just a shorthand way of saying that you are tuned to a standard reference pitch - that is, when you play the note A above middle C, it is tuned to the international standard of 440 Hertz. Tuning forks use this standard. So do electronic tuners, but some also offer you the flexibility to adjust the reference pitch slightly (which allows you to easily use your tuner but also sync up with, say, a slightly out-of-tune piano). Anyway, what phil_m is saying is that all you need to do is use the readout on your tuner - for drop D, just tune your low string till the tuner reads D, and you'll be in tune with any other instruments that tuned using the A440 standard reference pitch to calibrate. Clear as mud? :)  See http://en.wikipedia.org/wiki/A440_(pitch_standard) if you want to learn more.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...