MIKEY9966 Posted April 19, 2015 Share Posted April 19, 2015 OK so i am trying something new i want the aux in to work with the guitar in, you would think this would be easy guitar in, aux in set guitar and aux on the edit no luck i have a parker and godin with pezzio pickups, would like to run the pezzio in the aux and the humbucker on the guitar in i have tried a stereo cable guitar cable to the two inputs a aby to the two inputs a dime bag wha to the inputs why is this not working for me , i have been looking into this with no luck i see there is a mic input also and some have used a mic with the guitar so i know it works, what am i doing wrong? i am useing the xlr outs but i don't think that matters if i can get this going could i have 2 different sounds in one patch thanks again, Quote Link to comment Share on other sites More sharing options...
pfsmith0 Posted April 20, 2015 Share Posted April 20, 2015 I've been able to use Aux In and Guitar In, so the functionality is there. Perhaps it's a mixer setting? Using Path A = Guitar In panned Left and Path B = Aux In panned right should get you two independent signal paths. Try using no FX or amps to start with and set the mixer so both paths are panned to the center. Plug the guitar into Guitar In. Do you get an output? Now plug the same guitar into the Aux In. Do you get an output? Also, get onto the custom tone webpage and find one that uses voice & guitar. Change the Mic input to Aux input and try that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.