a_bailey94 Posted May 15, 2015 Share Posted May 15, 2015 Hi All, I was wondering after hours of looking on here if its possible to use the bottom four switches (which usually changes the banks) to be used the same as the top four purely to turn on and off effects without switching to another bank? Basically i want to run the top four pedals at the sametime and then add the other four during playing but obvisouly the bottom four switches will change the bank and turn the top four off. Any help or advice would be appreciated alot! As it would save me a fortune on buying single pedals. Thanks! Quote Link to comment Share on other sites More sharing options...
pfsmith0 Posted May 15, 2015 Share Posted May 15, 2015 Yes, you have to use the System Settings on the unit (not thru the Edit GUI) to switch the HD500 from ABCD mode to FS1-8 mode. It's in the manual. Quote Link to comment Share on other sites More sharing options...
pianoguyy Posted May 15, 2015 Share Posted May 15, 2015 You can also assign multiple fx to a single pedal. That way you can turn them on/off at the same time --- if that is something you need. It may reduce your need for 8 switches, depending on your usage. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.