cliffbroverman Posted June 2, 2015 Share Posted June 2, 2015 Hi, I had a problem with a xd-v75 hand held yesterday. The mic would go into mute mode without touching the button. I checked it both on a stand and handheld and as soon as the performer started singing it would partially shut down then come back muted. I say partially shut down because it did not go through it's full boot process. the screen would go dark and then come right back muted. We were using 5 xd series mics at the time. I switched out the mic and transmitter and the rest of the night went fine. During a break I was testing the mic and I noticed I could not assign a mic model. All the other parameters worked but the mic model screen showed "no model" and i could not change that screen. To make matters worse, I've just tested the mic, and everything works fine. (they're labled, so I'm sure it's the same system:-) No Mute Problems, Mic Mods work fine? Anyone have any suggestions. Does Line 6 have any testing methods that might root out intermittant problems. If so I'd be glad to send it in for testing/repair. This system is one of 2 backup/extra systems I carry and I don't like to have to worry that my back up won't work if I need it. Thanks Cliff Quote Link to comment Share on other sites More sharing options...
eklynx Posted June 2, 2015 Share Posted June 2, 2015 I'd try to unscrew the capsule, check the pushpins. I had a similar issue where i had to reseat the capsule once. It popped every time i'd mute/unmute the mic before it stopped working until reseat. Quote Link to comment Share on other sites More sharing options...
cliffbroverman Posted June 3, 2015 Author Share Posted June 3, 2015 Thanks. I'll check it out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.