VaMoose Posted July 12, 2013 Share Posted July 12, 2013 Hi all, So I have my desktop setup with cubase 5, and my pod hd400 set up as my audio interface. When I record, it records the tone on the pedal, but I am unable to change the tone at a later date, how can I fix this?? Thanks, Josh Quote Link to comment Share on other sites More sharing options...
silverhead Posted July 12, 2013 Share Posted July 12, 2013 The typical method of 'changing the tone at a later date' is achieved by- recording the 'dry' (unprocessed) tone to your DAW - apply software-based FX in your DAW to the recorded dry tone. These are called 'plug-ins' and allow flexibility in adjusting your tone at a later time. You are only limited by the scope and quality of your plug-ins. There are two problems in doing this with the expectation of later adjustment of HD400 tones: - the HD400 has no ability to send the dry tone to your DAW for recording - there is no Pod HD FX plug-in ... so the short answer is - there is no fix. And it wouldn't be a 'fix' because nothing is wrong or broken - the HD400 is simply not designed to do this. Of course you can apply other plug-in FX to the already-processed and recorded HD400 tone, but I don't think that's what you had in mind. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.