MIKEY9966 Posted September 19, 2015 Share Posted September 19, 2015 OK my set up is not working for me all this gear jvt 89 , pod 500x, 2 Dt25 , amplfi ,zoom g5,ect deep breath. Starting over OK step one I want to use the amplfi 150 for a full range acoustic sound So from my pod 500 fx send out to the amplfi My question is where do I put the Fx block , useing no amp model , before speaker, after speaker, after mixer? So I will just use the fx block on and off when I use acoustic. the acoustic sounds are better then the dt Then o will deal with the dts Quote Link to comment Share on other sites More sharing options...
MIKEY9966 Posted September 19, 2015 Author Share Posted September 19, 2015 So I tried today.. FX send into a zoom g5 ( pedal} out to 2 studio monitors and ampfi. For my acuostic sound Sounds good Now my heavy patch is done I want to step on pedal for just fx send and same pedal to turn on or off my dual tone,, can I use one pedal to switch between the 2 ''' hope some one understands what I am talking about FAX loop send on or off Same pedal 2 Dual amps on off same pedalf Quote Link to comment Share on other sites More sharing options...
Matt_Brown Posted October 11, 2015 Share Posted October 11, 2015 If you get the Acoustic DT patch from Customtone I cobbled together then use the FX send to the Amplifi and L6 link to the DT you should get a great acoustic tone. You could probably then use pre tones to DT & amp B tones with an FX block in that path to the Amplifi. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.