welmour Posted October 14, 2015 Share Posted October 14, 2015 I am about to lose it right now so i am opening a thread here as a last resort. I recently got a Line 6 Pod Studio Ux1. I brought it home plug it installed things from cd's it came with and later updated them with Line 6 Monkey. I got signal from my instrument input BEFORE updating drivers and pod farm, i could tune my guitar and i could see the signal bar go red and green. I updated the drives and all and it just stopped working. No signal from the instrument input. I am %140 sure that guitar and cable is ok, i even tried with other guitars and cables but still no signal. Line 6 monkey shows that everything is up to date, device manager tells that the device is working properly i set the ux1 as the default device, it appears as the device in use under pod farm's preferences-hardware section. So there is no reason for it to not work. I tried uninstalling and reinstalling the driver and also all line 6 related software. Still no green bar on pod farm after everything i've done. THERE IS NO APPEARENT REASON and it drives me crazy. I installed it on my laptop that runs w8.1 and it worked fine so the device is ok too. Quote Link to comment Share on other sites More sharing options...
ejy112 Posted October 15, 2015 Share Posted October 15, 2015 I'd verify your sampling rate. For some reason it seemed like my card was unresponsive with W10 until i dropped sample to 44.1 Quote Link to comment Share on other sites More sharing options...
welmour Posted October 15, 2015 Author Share Posted October 15, 2015 I changed the sample rates to every possible option but still nothing. I also tried with and without asio4all drivers. No one can help? Any line 6 guys? I am getting furious. Quote Link to comment Share on other sites More sharing options...
Triryche Posted October 20, 2015 Share Posted October 20, 2015 Are you selecting the correct input in Pod Farm in the mixer view? Btw… this is a user forum, although Line6 my drop in from time to time, it is not the direct channel for Line6 support. You can give them a call or open a support ticket. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.