guilhordas Posted July 25, 2013 Share Posted July 25, 2013 when we set the inputs in Variax and Variax inputs the 2 sounds come out at the same time? and if I want it to sound just one or the other, how do i separate the two? I usually leave the inputs in Variax and guitar, but I noticed that leavin in Variax and Variax mags the sounds of magenticos sound much higher. I want to be able to have the option to have the sound of mags, but not sounding along with the models Thanks Quote Link to comment Share on other sites More sharing options...
ozbadman Posted July 25, 2013 Share Posted July 25, 2013 There are 2 input sources. Set "INPUT 1 SOURCE" to "Variax Mags". Set "INPUT 2 SOURCE" to "Same". Setting either input to Variax will mean the models on the Variax also sound in the final mix. In your case, you don't want to use the models, so don't choose Variax as one of your input options. Quote Link to comment Share on other sites More sharing options...
guilhordas Posted July 25, 2013 Author Share Posted July 25, 2013 I want to use models, and mags but not in the same time Quote Link to comment Share on other sites More sharing options...
silverhead Posted July 25, 2013 Share Posted July 25, 2013 On page 3 of the Setup menus, set your Inputs Setup to Preset rather than Global. Then in each preset select your desired Input - either Variax or Variax Mags, not both. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.