Again, Thanks for taking the time and responding to my concerns, it really helps. I Appreciate that.
I have spent the whole afternoon playing with this trying to make it work, this is what I found:
1st, I am really trying to take advantage of using the L6Link connection with my setup, so, I am using it this way.
- The HD500X keeps changing the output mode to "Combo power Amp", and I really think it sounds better in "Studio/Direct" Mode.
Keep in Mind that I am also using the XLR outputs to send my signal to the FOH Mixer.
I mention this because one of my biggest concerns is to be able to send the same sound I hear in the L2t to the FOH Mixer.
So it sounds like you're taking a preset that sounds good on one rig, just changin it to full amp model and not re tweaking it is probably the issue.
You usually need to tweak a preset if you make a significant change.
Have you tried other amp models, and tweaking the EQ of the amp model to help it sound better.
- Yes, strangely, I found out that I have to Really Tweak my Presets to use in this setup ( With the L2t )
I was trying to use my pre existing presets from my old HD500+DT25 expecting them to sound the same or at least similar with the L2t
The tweaking is almost Extreme!.. I started to get Really good sounds by tweaking my pre existing presets.. Weird.
So, Pretty much every setup configuration needs to be tuned accordingly, I guess.
Again, My concern is to be able to replicate what I hear on the L2t ( That I use as my stage Monitor ) and send to the FOH Mixer thru the XLR Outs.
I am not sure it is the same sound..
And Another question, How can I make the HD500X remember to stay on "Studio/Direct" ??
The L2t seems to remember the speaker mode selected for each preset, which I think is pretty cool!!