Kascak Posted January 15, 2016 Share Posted January 15, 2016 I connected my JTV 69S using the Line 6 digital cable and a 1/4" guitar cord to my Pod HD ProX. The Pod is connected to my Win 8.1 Pro computer. Monkey software found the JTV and said there was a firmware update. I followed the Monkey instructions and the JTV firmware update started. The blue progress bar was showing progress and everything thing looked fine. Then Monkey said it couldn't finish. After this I cannot use the guitar models on the JTV. It won't even light up when you hold the "models" knob down. Any help to reset this would be appreciated. Thanks Kevin Quote Link to comment Share on other sites More sharing options...
psarkissian Posted January 20, 2016 Share Posted January 20, 2016 Flash it again. Sometimes it takes more than once. There has to be green LED's on the interface the whole time. If there is an interruption in the data during the process, it may induce a MIDI time out error, an eight with many zeros after it. Volume and tone controls at full clockwise. Quote Link to comment Share on other sites More sharing options...
Kascak Posted January 21, 2016 Author Share Posted January 21, 2016 Thanks, I flashed it again with a regular short ethernet cable and removed the battery. The flash worked fine and I'm back up and running. Thanks again, Kevin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.