FearTheAbyss Posted February 28, 2016 Share Posted February 28, 2016 So my Pod HD pro fx loop isn't working with my torpedo cab. Is there something I'm wrong? I've plugged an overdrive pedal without a power supply, it turns on but there's no sound. So, it's not my pedal, or my torpedo. And the overdrive works with my amp. So that would mean it's a problem with the pod. I've literally posted on UG, Gearslutz, Rig Talk and I've gotten very little help. I'm wondering if there's something I do to turn on my FX loop. Like on the pod itself or in the patch. Considering that it turned my overdrive pedal but didn't have an impact on the sounds means that it has connection, just no impact on the patch. Quote Link to comment Share on other sites More sharing options...
pianoguyy Posted February 28, 2016 Share Posted February 28, 2016 I'm wondering if there's something I do to turn on my FX loop. Like on the pod itself or in the patch. YES Quote Link to comment Share on other sites More sharing options...
kpsion Posted February 29, 2016 Share Posted February 29, 2016 FX Loop really act the way a stomp FX does You have on/off state and input volume, and output volume. And one point i've discovered , beware FX send you use cause pod input/path configuration impact FX send output . PATH A : POD Input 1 in FX Send Left (and nothing in right FX send) Maybe it was my configuration but that's the result i had, hope it can help Quote Link to comment Share on other sites More sharing options...
spaceatl Posted February 29, 2016 Share Posted February 29, 2016 Add an FX Loop block to your patch exactly where you want it to be in the chain. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.