Best Answer McLenison , 14 August 2013 - 11:57 AM
1. Are the lights green on both sides of the Variax USB interface? It sounds like the USB sides is green and the Variax side is red.
2. If the Variax side is red, try plugging a normal guitar cable into the 1/4" jack. Workbenck will not see the Variax unless it is powered on. The Variax is not powered on unless something is plugged into the 1/4" jack.
BTW, I tried mine while not connected to the internet and it works fine, AS LONG AS I HAVE SOMETHING PLUGGED INTO THE 1/4" JACK!!
Thanks! Everything was hooked up correctly, but I'm not sure what side the red light was on. I'll try again this weekend.Go to the full post