Jump to content


Photo

Playing Mp3/ Cd Device On Dt Amp

mp3 jamming backingtracks fx loop return cd player

  • Please log in to reply
2 replies to this topic

#1 Ronco46

Ronco46

    Just Startin'

  • Members
  • Pip
  • 12 posts
  • LocationBeja - Portugal

Posted 16 August 2013 - 05:17 PM

Hello everyone!

I read somewhere in this forum that DT Amps don't have a CD/mp3 input. That's right! But... since FX Loop Return is an analog input directly to DT power amp, I can connect a CD/mp3 player jack right there (if I don't need it for the 4 cable method) and i t works fine for jamming along a backingtrack (I've done it).

 

Very important question: Am I damaging anything in DT amp?

 

Thank you for your time.

Miguel


  • 0

#2 Crusty_Old_Rocker

Crusty_Old_Rocker

    Uber Guru

  • Line 6 Expert
  • 5112 posts
  • LocationGold Coast - Australia

Posted 16 August 2013 - 07:56 PM

You should be fine if using line level. Headphone output would be too hot especially if the volume is set high.

Cheers,

Crusty
  • 0

#3 Ronco46

Ronco46

    Just Startin'

  • Members
  • Pip
  • 12 posts
  • LocationBeja - Portugal

Posted 17 August 2013 - 01:24 AM

You should be fine if using line level. Headphone output would be too hot especially if the volume is set high.

Cheers,

Crusty

Ok, so if I have the CD player allways set with low volume I should be fine? How about if I plug it into POD HD CD input and then connect left unbalanced output to DT amp FX Loop Return... Does it give me some kind of extra protection?

Thanks!


  • 0





Also tagged with one or more of these keywords: mp3, jamming, backingtracks, fx loop return, cd player

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users