mickscrill Posted August 26, 2013 Share Posted August 26, 2013 hi there . my setup is JTV / HD500 / L2T i Want to blend the mags with the acoustic model as i personally think they are dreadful (the acoustic models) , clanky and harsh, lifeless, rant over, The mags warm them up a bit, is there a way of eqing say just path A in the mixer to eq the acoustic only, is it possible? Cheers folks. Quote Link to comment Share on other sites More sharing options...
phil_m Posted August 26, 2013 Share Posted August 26, 2013 Sure... Just set the input for Path A to be the Variax acoustic and the input for Path B to be the mags. As long as you keep the path separate, you can have completely independent effects in each one. Quote Link to comment Share on other sites More sharing options...
mickscrill Posted August 27, 2013 Author Share Posted August 27, 2013 Thanks Phil I have it set up that way but Cant seem to sus this out, it seems possible if your using an amp block i think but I'm trying to warm up the acoustic so i dont want an amp involved. Thank Quote Link to comment Share on other sites More sharing options...
phil_m Posted August 27, 2013 Share Posted August 27, 2013 Well, the two amp blocks will show up in the tone paths, but just bypass them by selecting "no amp" as the model (--- in HD500 Edit). The icon will still be there, but there won't be anything there affecting your tone. 1 Quote Link to comment Share on other sites More sharing options...
mickscrill Posted August 27, 2013 Author Share Posted August 27, 2013 Sorry yes i think ive got it, slit the amps turn them off you insert an effect and drag after the amp and mixer moves ahead. Cheers i think ive got it Thanks again for your time much appretiated Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.