krasnikpl Posted August 27, 2013 Share Posted August 27, 2013 Welcome What must be set , that POD HD 500 steered Amplitube 3 . ( Sorry for my English ) Quote Link to comment Share on other sites More sharing options...
joel_brown Posted August 28, 2013 Share Posted August 28, 2013 I think you need to try again. I can't understand what you're trying to say. Something I do when I communicate in other languages is use Google's translator. Quote Link to comment Share on other sites More sharing options...
krasnikpl Posted August 28, 2013 Author Share Posted August 28, 2013 Hello.What must be done to change preseted settings in soft Amplitube 3. Mentioned software was installed on PC with W7 OS with help of device called Line 6 POD HD 500.I will be gratefull for your help.Thanks in advance Quote Link to comment Share on other sites More sharing options...
BigChas52 Posted August 28, 2013 Share Posted August 28, 2013 I think this might be a question for the MIDI knowledgeable folks (not me). Perhaps he means how can you use an HD500 to control Amplitube 3? Quote Link to comment Share on other sites More sharing options...
krasnikpl Posted August 28, 2013 Author Share Posted August 28, 2013 " Perhaps he means how can you use an HD500 to control Amplitube 3? " = YES ! Quote Link to comment Share on other sites More sharing options...
DeanDinosaur Posted August 28, 2013 Share Posted August 28, 2013 In Amplitube you have to choose the POD HD500 ASIO Driver. IF you only want to hear amplitube and not the POD in LINE 6 devices in the monitor TAB, move the volume slider all the way to the left. Now you will only hear amplitube presets. Now remember as long as you USB is connected you will not hear POD HD unless you move that slider back to the right or in case you using a DAW you can activate the monitor on the audio track. 1 Quote Link to comment Share on other sites More sharing options...
krasnikpl Posted August 28, 2013 Author Share Posted August 28, 2013 Ok thx What must be done to change preseted settings in soft Amplitube 3 ? Quote Link to comment Share on other sites More sharing options...
Guitarmaniac64 Posted August 29, 2013 Share Posted August 29, 2013 Well to change presets you must do the Midi configuration yourself if you want to use the POD HD 500 as a Midipedalboard. Or any other product aswell unless you want to buy a gadget called Stealth Pedal from IK Multimedia but you still need an optional switching pedal in order to switch presets I tried to configure my Behringer Midipedalboard FCB 1010 to work with Amplitube (and Guitar RIG) but i did not have the patience to do it so i quit as it is a timeconsuming job and very very boring.. If you buy the IK Multimedia pedal and the swithing pedal they will "shake hands" immediately but with another midiboard you have to assigne every "midichannel" on the midipedalboard to the corresponding channel in Amplitube or any other software.. It is far more easy to use the corresponding products as they are ready make.. I remember first time i tried a rackunit called ART SGX 2000 and had a midipedal from Roland it did not work(out of the box) So i bought the ART version that was made for SGX unit and hooked it up with 2 midicables and everything just worked. 1 Quote Link to comment Share on other sites More sharing options...
krasnikpl Posted August 29, 2013 Author Share Posted August 29, 2013 Thank you very much for your answer.But what I need know is how to change preset from one to another up/down while PC is contected via Usb port.I have to add I do not have MIDI connection.Thank u for you time and help Quote Link to comment Share on other sites More sharing options...
dbagchee Posted August 29, 2013 Share Posted August 29, 2013 I don't think the Pod HD500 can do midi over usb - see http://line6.com/support/thread/85973 1 Quote Link to comment Share on other sites More sharing options...
krasnikpl Posted August 29, 2013 Author Share Posted August 29, 2013 Rozumiem ... Dziękuję za pomoc . :-) Quote Link to comment Share on other sites More sharing options...
kmoed Posted August 30, 2013 Share Posted August 30, 2013 Thank you very much for your answer.But what I need know is how to change preset from one to another up/down while PC is contected via Usb port.I have to add I do not have MIDI connection.Thank u for you time and help You cant change Amplitube presets via USB from the HD500, The USB is for AUDIO only on the HD500. So you would need a separate Midi INPUT on your PC, from a Sound card, audio interface etc.. Then connect the MIDI OUT on the HD500 to the MIDI IN on your interface via a MIDI cable. From there you can map the midi output on the HD500 to match what is needed in Amplitube to change presets. 1 Quote Link to comment Share on other sites More sharing options...
krasnikpl Posted August 30, 2013 Author Share Posted August 30, 2013 ok .. thx Quote Link to comment Share on other sites More sharing options...
panaman Posted September 1, 2013 Share Posted September 1, 2013 if your pc doesn`t have midi, you can get usb to midi adapters cheap (less than 10 €), try searching: usb midi logilink to get an idea. 2 or more adapters can be used simultaneously/independently. (may not apply to all brands/models). the built-in soundcard functionality is optional, doesn`t have to be used for midi. in amplitube, you will still have to edit/map the midi channels/codes though. happy midiing 1 Quote Link to comment Share on other sites More sharing options...
krasnikpl Posted September 8, 2013 Author Share Posted September 8, 2013 """In Amplitube you have to choose the POD HD500 ASIO Driver. IF you only want to hear amplitube and not the POD in LINE 6 devices in the monitor TAB, move the volume slider all the way to the left. Now you will only hear amplitube presets. Hi I have done what you recommended and...It worrked a bit. POD HD 500 is silenced but preset from POD 500 disturbing sound of preset from Amplitude.Can u help with this problem please Now remember as long as you USB is connected you will not hear POD HD unless you move that slider back to the right or in case you using a DAW you can activate the monitor on the audio track.""" Quote Link to comment Share on other sites More sharing options...
DeanDinosaur Posted September 9, 2013 Share Posted September 9, 2013 """In Amplitube you have to choose the POD HD500 ASIO Driver. IF you only want to hear amplitube and not the POD in LINE 6 devices in the monitor TAB, move the volume slider all the way to the left. Now you will only hear amplitube presets. Hi I have done what you recommended and...It worrked a bit. POD HD 500 is silenced but preset from POD 500 disturbing sound of preset from Amplitude.Can u help with this problem please Now remember as long as you USB is connected you will not hear POD HD unless you move that slider back to the right or in case you using a DAW you can activate the monitor on the audio track.""" Well for this to work , the patch in the POD HD has to be completely dry so the preset can't include amp models or anything in it.Unfortunately if you want to use the POD's Driver and use the POD as a controller, the PODs patches all have to be dry. A work around would be to make a setlist specifically for amplitube and copy a dry patch to all the presets in the Setlist in the POD. WHen you select that setlist, all the presets will be dry and won't effect the Amplitube presets. Quote Link to comment Share on other sites More sharing options...
krasnikpl Posted September 11, 2013 Author Share Posted September 11, 2013 Hi!After using dry patch (new tone) in HD 500 and conecting with Amplitube sound deformation is getting smaller but I can still notice(hear) kind of reverb.What I should change in new tone patch to make HD 500 not to interfering with Amplitube and working in the mode "bypass"Thanks for you time Quote Link to comment Share on other sites More sharing options...
TheRealZap Posted September 11, 2013 Share Posted September 11, 2013 have you tried simply selecting the tuner? (of course make sure that the tuner is not muted) Hi!After using dry patch (new tone) in HD 500 and conecting with Amplitube sound deformation is getting smaller but I can still notice(hear) kind of reverb.What I should change in new tone patch to make HD 500 not to interfering with Amplitube and working in the mode "bypass"Thanks for you time Quote Link to comment Share on other sites More sharing options...
krasnikpl Posted September 11, 2013 Author Share Posted September 11, 2013 "selecting the tuner" = look for this setting . I do not remember where it is . Quote Link to comment Share on other sites More sharing options...
TheRealZap Posted September 11, 2013 Share Posted September 11, 2013 hold the tap button on the 500 "selecting the tuner" = look for this setting . I do not remember where it is . Quote Link to comment Share on other sites More sharing options...
krasnikpl Posted September 11, 2013 Author Share Posted September 11, 2013 I'll try to do it at home . Thank you very much Quote Link to comment Share on other sites More sharing options...
krasnikpl Posted September 12, 2013 Author Share Posted September 12, 2013 Now it is well . thx Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.