johnonguitar Posted October 26, 2016 Share Posted October 26, 2016 I want the Elephant Man delay to be set at 82ms in one snapshot but 1/8 notes in another. No matter what I do it either stays in subdivisions or time settings when I change snapshot Is what I'm trying to do possible? Quote Link to comment Share on other sites More sharing options...
phil_m Posted October 26, 2016 Share Posted October 26, 2016 Not really, at least not with the same delay block. The delay time can either be in milliseconds or a set note value, and you can't go back and forth. You can't go from one note value to another with a snapshot controller, or one millisecond value to another, but not between the two. You can just add another instance of the Elephant Man block, though, and bypass the one you're not using in that particular snapshot. Quote Link to comment Share on other sites More sharing options...
johnonguitar Posted October 26, 2016 Author Share Posted October 26, 2016 Not really, at least not with the same delay block. The delay time can either be in milliseconds or a set note value, and you can't go back and forth. You can't go from one note value to another with a snapshot controller, or one millisecond value to another, but not between the two. You can just add another instance of the Elephant Man block, though, and bypass the one you're not using in that particular snapshot. Cheers. Thought I was going crazy there for a moment! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.