frstrat Posted December 11, 2016 Share Posted December 11, 2016 Hi, Just got a POD HD PRO X and a FBV3 foot controller. Both have updated firmware and what not. POD is set to foot switch 5-8 mode. What buttons on the FBV3 correspond to the assignable buttons in PRO X edit? Also, the FBV3 registers effects and are turned on and off via Edit but the FBV can turn those effects on or off. Any advice? Quote Link to comment Share on other sites More sharing options...
BillBee Posted December 12, 2016 Share Posted December 12, 2016 I don't have a FB3 but in HD Edit the assigns tab should have the info there on what and where you can assign the switching too. Quote Link to comment Share on other sites More sharing options...
frstrat Posted December 13, 2016 Author Share Posted December 13, 2016 The info is there under the "Controllers" tab but the footswitches in Edit don't seem to coorospond to the footswitches on the FBV3. Thanks for the reply anyway... Quote Link to comment Share on other sites More sharing options...
ZARDOZ6 Posted January 13, 2017 Share Posted January 13, 2017 Hi man, You have to update your FBV 3 via Line 6 Website with new free program (freeware). And when the update will be done, the FBV 3 will work perfectly with the POD HD PRO X. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.