GrutterInTheSea Posted December 27, 2016 Share Posted December 27, 2016 Hey guys! I wanted to know if you can assign the different outputs (balanced/unbalanced/L/R etc.) to different parts of the signal chain? For instance if i can assign one of the balanced outputs to the signal with cabinet simulation, so that i can run that into the PA, but assign one of the unbalanced outputs to the signal after the Preamp and before the cab sim, so that i can run that signal to a poweramp and into a 4x12 cab. Thx a lot for the help! Quote Link to comment Share on other sites More sharing options...
pianoguyy Posted December 27, 2016 Share Posted December 27, 2016 Left and right. You can separate the left and the right, but not (as example) left xlr from left 1/4". Also, note, this is not a setting of "left has cab, right does not." It is all based on how you design your signal chain. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.