azimmer Posted January 10, 2017 Share Posted January 10, 2017 I have a pair of Mackie Powered PA speakers that I would like the output of my Amplifi 75 to plug into my Mackie 4 channel mixing board and then out to the PA speakers. Which output jack on the Amplifi 75 should I use to do this? If I use the headphone jack can that damage my PA Speakers? Quote Link to comment Share on other sites More sharing options...
jdavidboyd Posted January 10, 2017 Share Posted January 10, 2017 I'd start with turning the amp down, plugging into the headphone jack, and turning it up until you get good sound volume. You probably won't have to turn the amp up too loud, just be careful. I doubt that anything coming out of the headphone jack will have sufficient power to nuke your mixer, but be careful. I've done this many times, with several amps. Never had a problem, but be cautious. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.