ajr324 Posted February 5, 2017 Share Posted February 5, 2017 When I plug my JTV-59 directly into my Fender twin amp with the modeling on it is very quiet. When I run it through my hd500 I get a fairly prominent hum. The output is set to combo front and the far right switch on top is set to amp. It's set to stomp on back. I use it in stomp box or pedal board mode I do use the effects loop for an external pedal and I've turned the loop send and return and mix down so the level is about the same as when it's off. What else can I do with the hd500 to get rid of the hum? I've searched on here to no avail. Using all different kinds of search criteria. I'm using the VDI cable, and running a guitar out of the 1/4" output into the front of the amp. I do also use an old flextone 3 xl and it's a bit quieter,but I'd really like to be able to use the twin amp. Anybody got any ideas? Is there a deep editing solution? Quote Link to comment Share on other sites More sharing options...
pfsmith0 Posted February 6, 2017 Share Posted February 6, 2017 Disconnect the HD500 from the PC and see what happens. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.