Smashcraaft Posted February 15, 2017 Share Posted February 15, 2017 Sometimes I am bored and that´s when I start to develop ideas and post them on ideascale for no reason at all… B) https://line6.ideascale.com/a/dtd/POD-HD-much-clearer-Bank-and-Patch-Selection/868954-23508 I am not really happy with the selection auf the patches because it is often happening, that I have similar named patches in different banks. For example I store patches like "crunch", "lead", "clean" in a bank which is related to a song. Because of that, I like to see the recent offered bank represented by its bank-name, which could be handled as designed below… https://drive.google.com/open?id=0B1mFP-M4XLfWcFM1TV9zQkd4Tzg Quote Link to comment Share on other sites More sharing options...
cruisinon2 Posted February 15, 2017 Share Posted February 15, 2017 The odds of any significant changes to the POD HD series at this point is basically zero...clearly their efforts are focused on Helix. Quote Link to comment Share on other sites More sharing options...
JTSC777 Posted February 15, 2017 Share Posted February 15, 2017 Having owned/ gigged Boss GT-3/8/10-Roland GR33/55 etc.../ Korg multi-effects/ Digitech multi-effects etc... I quite like the layout of physical switches on my HD500 and dont care about naming banks.I always learn where all 10 of them are and always know how to access them.Right now I am not using it a lot.Waiting for the new IR loading pedal by Atomic to use with it. Quote Link to comment Share on other sites More sharing options...
EyeTigerStorm Posted March 25, 2017 Share Posted March 25, 2017 Hey guys, I'm new to the site and just recently purchased a HD500x. I created my own custom patches, but I'm having some problems with this: I want to switch between patches using the up and down bank arrows, but they just seem to want to move around the current patch i'm using to different spots instead of going to patches before or afterward. Any advise would be greatly appreciated, thank you again. Quote Link to comment Share on other sites More sharing options...
pianoguyy Posted March 25, 2017 Share Posted March 25, 2017 have you saved your files? Quote Link to comment Share on other sites More sharing options...
cruisinon2 Posted March 25, 2017 Share Posted March 25, 2017 As you've observed, the arrow switches move up or down to the next bank of 4 patches...the A,B,C and D switches are what you use to change from one patch to another. At any given time, you only have access to one bank of 4 patches. If you need more than 4 to be accessible for a given tune, it requires more tap dancing. You'll have to changes banks first with the up/down arrows, then select the patch you want with the A thru D switches. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.