Please ensure Javascript is enabled for purposes of website accessibility Jump to content

L2T and L2M sideways in stereo?


Recommended Posts

Hi,

When the speakers are placed in standing position I use the folowing setup:

 

Helix > Aux in (rear combo connector) on both L2's

Monitor feed from FOH mixer > Mixer in on L2T (set to linked stereo)

L2's connected via L6 Link

 

Using the same setup when they are placed sideways, the monitor feed is mono, because the speakers are going into monitor mode. Is there any way to get it stereo without using an external mixer (which would kind of defeat the purpose of the L2T's built in mixer).

 

Thanks!

Link to comment
Share on other sites

Thanks for your reply.

With monitor mode, I don't mean the setting on the back. I know you can change that, but from what I've read so far, that's only an EQ correction. Normally when you connect two L2's via L6 Link, one will read R and one will read L in the display on the back. But when you place the L2's on their sides, the display reads B (for both) meaning it will output both the left and right channel. So my question is if that can be overridden.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...