Flarpus Posted March 8, 2017 Share Posted March 8, 2017 I'm trying to use my Scarlett 2i2 with POD Farm 2.59 and the sound is terrible. I honestly don't know how to describe it very well. It's a really weak signal, but at the same time it is clipping, the output is constantly in the red on POD Farm. I'll attach an audio clip and I swear my tone isn't just bad and that I'm that terrible haha. I bought the POD Farm software without a Line 6 hardware device. I've always had this problem since I bought POD Farm 2 years ago. I was thinking it was an incompatible driver, but I'm not sure. Please help :) Thanks, Alex Quote Link to comment Share on other sites More sharing options...
Flarpus Posted March 11, 2017 Author Share Posted March 11, 2017 Does anyone have any ideas? Quote Link to comment Share on other sites More sharing options...
Flarpus Posted March 16, 2017 Author Share Posted March 16, 2017 Well, sucks for me... Quote Link to comment Share on other sites More sharing options...
fflbrgst Posted March 16, 2017 Share Posted March 16, 2017 No audio clip attached. Assume you are using PodFarm as a 'stand alone' (not a plug in in a DAW)? Quote Link to comment Share on other sites More sharing options...
craigl6 Posted March 17, 2017 Share Posted March 17, 2017 On my Scarlet Solo, I am using input 2 so I have to go in each time Podfarm starts up to switch from input 1 to input 2 (it annoyingly does not remember the input selection). After I change the input, I get bad clipping until I select a certain tone (Boston, More than a Feeling) which seems to put it back to normal. Quote Link to comment Share on other sites More sharing options...
Flarpus Posted March 18, 2017 Author Share Posted March 18, 2017 No audio clip attached. Assume you are using PodFarm as a 'stand alone' (not a plug in in a DAW)? Thanks for reply! Don't know why the clip wasn't attached and I can't figure out how to attach it again, sorry. To answer your question, I am using it as a stand alone, but I also tried using it in reaper and it does the same thing. Quote Link to comment Share on other sites More sharing options...
Flarpus Posted March 18, 2017 Author Share Posted March 18, 2017 On my Scarlet Solo, I am using input 2 so I have to go in each time Podfarm starts up to switch from input 1 to input 2 (it annoyingly does not remember the input selection). After I change the input, I get bad clipping until I select a certain tone (Boston, More than a Feeling) which seems to put it back to normal. Thanks for the reply too! That's weird though... Now that I think of it, I remember doing something similar and it fixed it temporarily too. I tried again today and it didn't work. I don't understand what would cause an intermittent problem like that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.