Jump to content


Help With Hd500 Fx Loop Summing Stereo Fx Return?

stereo fx loop hd500 mono

  • Please log in to reply
No replies to this topic

#1 timmyweb


    Just Startin'

  • Members
  • Pip
  • 1 posts
  • Registered Products:4

Posted 14 September 2013 - 06:46 PM

Hi all, I have a mono reverb > stereo delay in the HD500 fx loop. Mono cable on the POD send to the mono effect; mono cable from that to the mono in on the stereo delay; stereo out from the delay with both L & R cables back to the stereo input on the POD fx return. The fx loop block is in the last position after the mixer, yet I do not hear the stereo returns from the stereo delay. It comes back as mono. I would think that even though it's a mono send, the delay should still come back as stereo, as there are no mono fx after the fx loop in the chain. Does anyone have any pointers? I'm at a loss. I've tried taking the mono reverb out of the chain but the stereo delay still comes back as mono.

  • 0

Also tagged with one or more of these keywords: stereo, fx loop, hd500, mono