JC-Tonequest Posted July 31, 2017 Share Posted July 31, 2017 Can you assign more than one parameter control to the footswitches in command center? I just picked up an EVH 5150 III 50 Watt head. It has midi control to change the channels on the amp via Midi PC, and turn the FX Loop on/off via Midi CC's. I'd like to be able to have the same footswitch control the amp channel and the FX loop state. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
bobruz Posted August 1, 2017 Share Posted August 1, 2017 From Helix Manual: "NOTE: Each footswitch can have up to 8 assignments. If you attempt to add a ninth, "Can't assign any more blocks to this footswitch!" appears in the header: Can’t assign any more blocks to this footswitch! Quote Link to comment Share on other sites More sharing options...
JC-Tonequest Posted August 2, 2017 Author Share Posted August 2, 2017 Thanks for the reply. I do realize that you can assign up to 8 parameters to the footswitches. I was referring to assigning the functions I previously stated in the command center menu alone. Have one footswitch control the cannel and loop on/off state simultaneously in the command center. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.