Hi guys. I have had my PodHD400 for nearly a year and have only recently tried using Pod HD400 Edit. The problem is that I have downloaded and installed everything, yet it will not recognize the input, even though my computer does, and I can record into Garageband (although the sounds aren't anywhere near as good as when it is coming out of my amp?). I have checked all the settings and it should be right. Help please. Thanks.
Pod Edit Shows "no Line 6 Device Connected":
Posted 29 September 2013 - 03:48 AM
... I have checked all the settings and it should be right. Help please. .....
This makes it a little difficult to help because we don't have much info. If indeed, the settings are all correct then there could be a hardware problem and you will need to take the device (or your computer) in for repair.
However it is quite possible that there is a problem with settings or setup, and we will be able to help if we have more info. Please describe exactly your setup - all pieces of equipment you are using - and how you did the installation. Does Line 6 Monkey recognize your HD400? Are you using a separate audio interface? How are you monitoring your sound? What output mode are you using? .... etc., etc.
.... John Lennon
Posted 29 September 2013 - 06:09 AM
Also, make sure you are using a USB 2.0 post. Many of the newer computers (like mine) come with a ton of USB 3.0 ports, but only a few USB 2.0 ports. I was having a similar difficulty until I switched ports. I don't know if this will solve your issue, but it's worth a try.