JamesHiscox Posted September 29, 2013 Share Posted September 29, 2013 Hi guys. I have had my PodHD400 for nearly a year and have only recently tried using Pod HD400 Edit. The problem is that I have downloaded and installed everything, yet it will not recognize the input, even though my computer does, and I can record into Garageband (although the sounds aren't anywhere near as good as when it is coming out of my amp?). I have checked all the settings and it should be right. Help please. Thanks. Quote Link to comment Share on other sites More sharing options...
silverhead Posted September 29, 2013 Share Posted September 29, 2013 ... I have checked all the settings and it should be right. Help please. ..... This makes it a little difficult to help because we don't have much info. If indeed, the settings are all correct then there could be a hardware problem and you will need to take the device (or your computer) in for repair. However it is quite possible that there is a problem with settings or setup, and we will be able to help if we have more info. Please describe exactly your setup - all pieces of equipment you are using - and how you did the installation. Does Line 6 Monkey recognize your HD400? Are you using a separate audio interface? How are you monitoring your sound? What output mode are you using? .... etc., etc. Quote Link to comment Share on other sites More sharing options...
BigChas52 Posted September 29, 2013 Share Posted September 29, 2013 Also, make sure you are using a USB 2.0 post. Many of the newer computers (like mine) come with a ton of USB 3.0 ports, but only a few USB 2.0 ports. I was having a similar difficulty until I switched ports. I don't know if this will solve your issue, but it's worth a try. 1 Quote Link to comment Share on other sites More sharing options...
eltue123 Posted March 20, 2018 Share Posted March 20, 2018 I know this is an old post but I was having this problem and I did a MIDI dump and BAM power cycled it and the computer seen it. I reinstalled driver like 3 times, tried different ports, computers, cables, ect and doing a MIDI dump worked. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.