Simple looper question...sorry to bother you....

[themetallikid]

But for the life of me I cannot figure out how to jump between the editing chain screen and the screen that shows the looper controls.  Trying to do lots of editing and I know I can put the looper in the first block, but can't find anything that explains how to get to the control screen.

 

 

couple things...

 

1) Yes I know this is probably way easier than I'm trying to make it, and that is causing more issues...

 

2) Yes, I realize this is a waste of forum space, lol

 

3) Yes, I feel like dweeb having to ask this when I've done it before.  

 

 

 

[Lotta_Gear]

Haven't tried what you're doing specifically, but I use the looper quite a bit. When you're in the looper controls, let's say you've recorded a loop and you want to go somewhere else while letting the looper continue to play. Press the "Mode" switch to exit from the looper. It will continue to play. I think you could then hit the "home" button to show the editing screen and the looper should keep playing.

[PeterHamm]

1. Assign the looper to a footswitch.

2. Press the switch and you will go to looper controls.

3. Press Exit and you will be back where you came from.

 

The only stupid question is the one that is never asked.

[themetallikid]

I figured it out.....when in the 'effects chain' view use the joystick to highlight the looper block, then push the bypass button, this exits the effects chain screen and brings up the screen with the looper controls.  Once you start editing it will change back, but the buttons for Stop/Play stay lit and control the looper still.