bluie3 Posted October 2, 2013 Share Posted October 2, 2013 I got a new computer a few months ago, and reinstalled everything, but now when i use Pod farm as an insert in cubase, it sounds like its not even working properly. I added a clip of an old song i did. The first is how it used to sound, then I opened the session again, didnt change anything, and you can hear how wrong it sounds in the second clip. I tried to reinstall it, but that hasnt fixed it. Any ideas? thanks https://soundcloud.com/bluie3/pod-farm-messing-up Quote Link to comment Share on other sites More sharing options...
Triryche Posted October 2, 2013 Share Posted October 2, 2013 On the 2nd part did you pull the faders back on everything except the guitar to highlight the issue? If not, there is way more wrong than POD Farm, unless you used it on the drums and bass too. What type of POD Farm do you have? Hardware enabled tied to a Line6 device like UX2, PODxt, X3, ect... A purchased software license-hardware independent A purchased software- iLok ?? Quote Link to comment Share on other sites More sharing options...
bluie3 Posted October 3, 2013 Author Share Posted October 3, 2013 I dIdnt pull the faders down, but theres a limiter on the master. The guitar track now peaks at 14db and is just a bunch of noise, so the limiter just made it sound that way. I have POD Farm 2 I dont know how to set it up to be used with the POD X3 which I now use. I had been just using gear box, but there are some tones I want to use from POD Farm which dont open in gearbox, so i just record a clean channel, and put the insert I bought POD Farm 2 by itself, before I got the POD X3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.