duykeu Posted November 13, 2017 Share Posted November 13, 2017 Hi everyone, My name is Duy, I'm from VietNam. my English is not good, but I hope everyone can understand and Help me!I have a FireHawk FX, my FHFX has a problem and I don't know how to fix it. When I pushed the pedal, the red light in volume was dissapeard, and Delay was lost. Although I set up delay not Assign to pedal. I tried reset factory, up and down fimware but this mistake was not fixed... I hope Somebody can help me to fix this mistake!! Thanks so much!! Quote Link to comment Share on other sites More sharing options...
JamieCrain Posted November 15, 2017 Share Posted November 15, 2017 Hi Duy, can you post a video? Quote Link to comment Share on other sites More sharing options...
Geetarhed Posted November 23, 2017 Share Posted November 23, 2017 Hi everyone, My name is Duy, I'm from VietNam. my English is not good, but I hope everyone can understand and Help me! I have a FireHawk FX, my FHFX has a problem and I don't know how to fix it. When I pushed the pedal, the red light in volume was dissapeard, and Delay was lost. Although I set up delay not Assign to pedal. I tried reset factory, up and down fimware but this mistake was not fixed... I hope Somebody can help me to fix this mistake!! Thanks so much!! Try getting a Boss GT100, although the Firehawk FX is a great unit, the Boss is much easier to use with the Bosstone software. Good luck, cheers Quote Link to comment Share on other sites More sharing options...
JamieCrain Posted November 23, 2017 Share Posted November 23, 2017 Try getting a Boss GT100, although the Firehawk FX is a great unit, the Boss is much easier to use with the Bosstone software. Good luck, cheers Not sure that’s particularly helpful, especially in the short term. Duy, it sounds like another effect is assigned to the volume pedal. Or it could even be the amp. Try going through each block. If you can’t resolve it, start a new patch and delete the old one. Quote Link to comment Share on other sites More sharing options...
chrisxdlr Posted January 19, 2018 Share Posted January 19, 2018 I think I am having the same issue. What has been happening with me is as soon as I touch the expression pedal, it begins to adjust the FX. For example, I have a preset tone already set up. I will touch the volume pedal, and the screen will indicate that I've just adjusted the tone. Let me explain further. 1. I select the tone of my choice. Screen will read "06C American Clean" 2. I touch volume pedal 3. Screen indicates I've adjusted the preset and will change to "06C. American Clean" along with the red volume circle turning white and moving like I just turned the FX knob. Weird. Not sure if this is the issue you're having, but I think it's similar. Quote Link to comment Share on other sites More sharing options...
djcanilla Posted February 6, 2019 Share Posted February 6, 2019 I am having the same issue but without even touching the pedal. I'll be playing and the parameters on my delay (which has fx assigned to it but not to pedal) will change drastically. Don't understand why this should change on its own. chrisxdlr have you resolved this? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.